| Conveyor belt width | 250mm |
|---|---|
| Conveyor length | 800mm |
| Transport medium | Urethane belt |
| Conveyor belt speed | 10～60m/min |
| Display | 7inch touch panel color display |
| Operation method | Touch panel (WVGA), Key switch |
| Number of recorded items | 1000 |
| Communication functions | Modbus TCP / Modbus RTU / TCP/IP（PostScript printer） / |
| USB (for USB memory, data storage, image import use) | |
| External input | Non-voltage contact input 4 points |
| External output | Relay output 8 points |
| Dust/water resistance specifications | IP65 compliant |
| Operation temperature/humidity range | 0～40℃/Humidity below 85%(with no condensation) |
| Power supply | Single phase AC100V～240V(+10%,-15%),50/60Hz,100VA |
| Material | Sensor head: Stainless Steel Display: ABS resin Conveyor unit: Phenolic resin, stainless steel, aluminum (alumite treatment) Control box: ABS resin Base unit: Stainless steel |
Operating precautions
1. Decide where in the production process to install the metal detector by assessing the risk of metal contamination.
● For raw materials with a lot of metal contaminants, install a metal detector before processing begins.
● For products packed in aluminum foil packages, install a metal detector before the packaging process.
● For frozen products, install a metal detector after freezing. (make sure the product is frozen to the core and is below-18 degrees celcius.)
2. Production flow of horizontally long or oblique orientation is preferable.
3. Keep inspected products as small as possible.
4. Keep product temperature constant.
5. Installing the metal detector in an area with little vibration is advised.
6. Dedicated 100-240V wiring with low noise is advised.
7. Make sure to ground the metal detector.
8. Remove vibrating or shifting metals near the sensor head.
9. Make sure that ground loops are not created by nearby equipment.
10. Please prepare a φ4-7mm power cable.
1. Decide where in the production process to install the metal detector by assessing the risk of metal contamination.
● For raw materials with a lot of metal contaminants, install a metal detector before processing begins.
● For products packed in aluminum foil packages, install a metal detector before the packaging process.
● For frozen products, install a metal detector after freezing. (make sure the product is frozen to the core and is below-18 degrees celcius.)
2. Production flow of horizontally long or oblique orientation is preferable.
3. Keep inspected products as small as possible.
4. Keep product temperature constant.
5. Installing the metal detector in an area with little vibration is advised.
6. Dedicated 100-240V wiring with low noise is advised.
7. Make sure to ground the metal detector.
8. Remove vibrating or shifting metals near the sensor head.
9. Make sure that ground loops are not created by nearby equipment.
10. Please prepare a φ4-7mm power cable.